Pass4itsure can be the best choice for your Microsoft 70-741 dumps exam preparation. If you prepare and practice the provided 70-741 dumps study material thoroughly your success is 100% sure. Pass4itsure high pass rate Networking Microsoft https://www.pass4itsure.com/70-741.html dumps study guides released with valid pdf actual questions 100% pass with a high score.
Exam Code: 70-741
Exam Name: Networking with Windows Server 2016
Updated: Aug 18, 2017
[2017 New Update Microsoft 70-741 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWU9QM0NyNGN1cFU
[2017 New Update Cisco 210-255 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWOXlNazlKRi1GcFU
Learning Microsoft 70-741 dumps Objectives
Learning Time: 18 hours
- Installing and Configuring DNS Servers Part 1
- Installing and Configuring DNS Servers Part 2
- Implementing DNSSEC
- Managing DNS Zones and Resource Records
- Installing and Configuring DHCP Server Part 1
- Installing and Configuring DHCP Server Part 2
- Implementing DHCPv6 Server
- Managing IPv4 and IPv6 Addresses
- Implementing VPN Solutions Part 1
- Implementing VPN Solutions Part 2
- Installing and Configuring VPN Reconnect
- Implementing Network Policy Server
- Configuring Routing and Network Address Translation
- Install and Configure IPAM
- Configuring Distributed File System
- Implementing BranchCache
- Configuring Advanced Hyper-V Networking Features
- Implementing DirectAccess
Pass4itsure Latest and Most Accurate Microsoft 70-741 Dumps Exam Q&As:
AP-1 is a 3×3:2 AP. STA-3 is a 3×3:3 client. What is the maximum number of spatial streams that can be
used for a downlink HT-OFDM transmission from AP-1 to STA-3?
A. One spatial stream, because the definition of the AP indicates that it is capable of only one spatial
B. Three spatial streams, because the definition of the client indicates that it is capable of only three
C. Two spatial streams, because the definition of the AP indicates that it is capable of only two spatial
D. Three spatial streams, because the definition of the AP indicates that it is capable of only three spatial
70-741 exam Correct Answer: C
You are implementing a VHT-capable AP. Which one of the following channels is available in the 802.11ac
amendment to the 802.11-2012 standard, which was not available in the standard before this amendment?
Correct Answer: B
You are selecting antennas for a WLAN operating in the 5 GHz frequency band. What specifications
should be evaluated for an antenna before it is implemented in this WLAN system? (Choose 3)
A. 802.11ad compatibility
B. TPC support
C. Impedance in Ohms
D. Elevation Beamwidth
E. Return Loss Rating
F. Operating Frequencies
70-741 dumps Correct Answer: CDF
What is the intended use for the WLAN hardware known as a pole or mast mount unit?
A. Mounting a lightning arrestor to a grounding rod
B. Mounting an omnidirectional antenna to a mast
C. Mounting an RF amplifier to a dipole antenna
D. Mounting a PoE injector to a perforated radome
E. Mounting an access point to a site survey tripod
Correct Answer: B
XYZ Corporation is experiencing connectivity problems with their existing building-to-building bridge link. A
concrete wall on the roof of one building is partially blocking the Fresnel Zone, and the connection is
dropping many frames. The administrator moves the antenna to an area not obstructed by the concrete
wall and then realizes the RF cable cannot reach the new location. If an extension cable is added to move
the antenna, what are the likely results?
A. The data throughput rate will increase because VSWR will decrease.
B. The Equivalent Isotropically Radiated Power (EIRP) will decrease.
C. The antenna’s azimuth beamwidth will decrease.
D. The size of the Fresnel zone will increase.
E. The likelihood of a direct lightning strike will increase.
70-741 pdf Correct Answer: C
Which IEEE 802.11 physical layer (PHY) specifications include support for and compatibility of both OFDM
and HR/DSSS? (Choose 2)
A. HR/DSSS (802.11b)
B. OFDM (802.11a)
C. ERP (802.11g)
D. HT (802.11n)
E. CCK (802.11b)
F. VHT (802.11ac)
Correct Answer: CD
The IEEE 802.11-2012 standard requires VHT capable devices to be backward compatible with devices
using which other 802.11 physical layer specifications (PHYs)? (Choose 2)
70-741 vce Correct Answer: AB
In addition to throughput enhancements, what other improvements does a dual-band 802.11ac AP provide
when compared with 802.11a/g APs? (Choose 2)
A. Introduces “fast transition” roaming protocols for VoWiFi phones
B. Better link reliability between 802.11a/b/g client devices and 802.11ac APs
C. Improves service quality for real-time applications at greater distances
D. Increases in receive sensitivity enhance RTLS location accuracy
E. Stronger security with more robust encryption modes.
Correct Answer: BC
What factors are likely to cause the greatest impact on the application layer throughput of an 802.11n
client station in a 2.4 GHz HT BSS? (Choose 3)
A. Use of WEP or TKIP for encryption instead of CCMP
B. Use of passphrase authentication instead of 802.1X/EAP authentication
C. Increasing the beacon interval from 100 to 200 (TUs)
D. RF interference from more than 10 nearby Bluetooth transmitters
E. Increasing or decreasing the number of spatial streams in use by the client station and AP
70-741 exam Correct Answer: ADE
What factors will have the most significant impact on the amount of wireless bandwidth available to each station within a BSS? (Choose 2)
A. The number of client stations associated to the BSS
B. The power management settings in the access point’s beacons
C. The presence of co-located (10m away) access points on non-overlapping channels
D. The data rates at which nearby client stations are transmitting and receiving data
E. The layer 3 protocol used by each station to transmit data over the wireless link
Correct Answer: AD
What are two channel modes specified by the 802.11n (High Throughput) PHY? (Choose 2)
A. 20 MHz
B. 20/40 MHz
C. 40/80 MHz
D. 22 MHz
E. 80 MHz
F. 160 MHz
70-741 dumps Correct Answer: AB
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping? (Choose
A. Channels 5 and 10
B. Channels 1 and 5
C. Channels 3 and 7
D. Channels 2 and 8
E. Channels 8 and 11
F. Channels 10 and 13
Correct Answer: AD
What facts are true regarding controllers and APs in a Split MAC architecture? (Choose 2)
A. An IP tunnel is established between the AP and controller for AP management and control functions.
B. Using centralized data forwarding, APs never tag Ethernet frames with VLAN identifiers or 802.1p CoS.
C. With 802.1X/EAP security, the AP acts as the supplicant and the controller acts as the authenticator.
D. Management and data frame types must be processed locally by the AP, while control frame types
must be sent to the controller.
E. In a distributed data forwarding model, the AP handles frame encryption and decryption.
70-741 pdf Correct Answer: AE
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz).
What is the center frequency of channel 4?
A. 2.413 GHz
B. 2.417 GHz
C. 2.422 GHz
D. 2.427 GHz
E. 2.437 GHz
Pass4itsure 70-741 dumps exam question answers will give 100% coverage of your Microsoft https://www.pass4itsure.com/70-741.html dumps and 70-741 exam test engine provides you complete insight into exam objectives in a precise but comprehensive way.