Download New Cisco 300-115 Exam Dumps 2017 for Preparation

Passitdump study material contains the format of question and answers. It is in conformity with the actual exam situation and therefore will be equal to your exam specifications. The questions and answers established by our Cisco 300-115 PDF on various parts of the certification curriculum contain comprehensive and the most recent information available. The excellence level of our 300-115 exam study materials is analyzed and approved by famous experts of the specific areas. You never experience preparing the curriculum that there is any wrong or poor stuff included.

Vendor: Cisco
Certifications: CCDP
Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks (SWITCH v2.0)
Total Questions: 201 Q&As
Updated on: Feb 20, 2017
Exam Information:http://www.passitdump.com/300-115.html

 300-115 pdf

Cisco 300-115 has a series of benefit for the certification holder:

First-class preparation is the key to acing any certification exam. We offer remarkable planning material for the Cisco 300-115 certification exam. These Cisco 300-115 certification exercise materials are available for applicants who desire to clear the Cisco 300-115 exam in the first effort. The Cisco 300-115 certification exam planning products come in two types. These include the Cisco 300-115 dumps exercise material in PDF format and the exercise test application.
  • VTP (Sim) Practice lab for Switch Exam
  • MLS and EIGRP Sim
  • AAA dot1x Lab Switch Sim
  • STP Practice lab Sim for Switch Exam
  • LACP with STP Sim
  • STP Switch Sim
  • significantly helping the possessor’s expert reliability
  • validates one’s particular technical abilities
  • individuals who have obtained the Cisco 300-115 vce have better brings of using continuous job positions within well-known IT companies

Passitdump is website that can take you access to the road of success. Passitdump can provide the quickly passing Cisco Specialist 300-115 exam questions and answers for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Cisco certification 300-115 dumps  for only one-time.Through the feedback of many examinees who have used Passitdump training program to pass some IT certification exams, it proves that using Passitdump Cisco Specialist 300-115 questions and answers to pass IT certification exams is very easy.

300-115 PDF Free Demo Download: 

QUESTION 1
What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Up to 9 Cisco Catalyst switches can be stacked together to build single logical StackWise switch since Cisco IOS XE Release 3.3.0SE. Prior to Cisco IOS XE
Release3.3.0SE, up to 4 Cisco Catalyst switches could be stacked together.
Reference:
QUESTION 2
A network engineer wants to add a new switch to an existing switch stack. Which configuration must be added to the new switch before it can be added to the
switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Correct Answer: A
Explanation
Explanation/Reference:
Switch Stack Offline Configuration
You can use the offline configuration feature to provision (to supply a configuration to) a new switch before it joins the switch stack. You can configure in advance
the stack member number, the switch type, and the inter- faces associated with a switch that is not currently part of the stack. The configuration that you create on
the switch stack is called the provisioned configuration . The switch that is added to the switch stack and that re- ceives this configuration is called the provisioned
switch .
You manually create the provisioned configuration through the switch stack-member-number provision type global configuration command. The provisioned
configuration is automatically created when a switch is added to a switch stack and when no provisioned configuration exists.
When you configure the interfaces associated with a provisioned switch (for example, as part of a VLAN), the switch stack accepts the configuration, and the
information appears in the running configuration. The interface associated with the provisioned switch is not active, operates as if it is administratively shut down,
and the no shutdown interface configuration command does not return it to active service. The interface associated with the provisioned switch does not appear in
the display of the specific feature; for example, it does not appear in the show vlan user EXEC command output.
The switch stack retains the provisioned configuration in the running configuration whether or not the provi- sioned switch is part of the stack. You can save the
provisioned configuration to the startup configuration file by entering the copy running-config startup-config privileged EXEC command. The startup configuration
file ensures that the switch stack can reload and can use the saved information whether or not the provisioned switch is part of the switch stack.
Effects of Adding a Provisioned Switch to a Switch Stack
When you add a provisioned switch to the switch stack, the stack applies either the provisioned configuration or the default configuration. Table 5-1 lists the events
that occur when the switch stack compares the provisioned configuration with the provisioned switch.
Table 5-1 Results of Comparing the Provisioned Configuration with the Provisioned Switch
Scenario Result
The stack member num- 1. If the stack member number The switch stack applies bers and the switch types of the provisioned switch the provisioned configuramatch. matches the stack member num- tion to the provisioned ber in the provisioned configura- switch and adds it to the tion on the stack, and stack.
2. If the switch type of the provisioned switch matches the switch
type in the provisioned configuration on the stack.
The stack member num- 1. If the stack member number The switch stack applies bers match but the switch of the provisioned switch the default configuration to
types do not match. matches the stack member num- the provisioned switch and ber in the provisioned configuration on the stack, but adds it to the stack.
2. The switch type of the provi- The provisioned configura- sioned switch does not match the tion is changed to reflect switch type in the provisioned the new information.
configuration on the stack.
The stack member num- The switch stack applies
ber is not found in the pro- the default configuration to
visioned configuration. the provisioned switch and
adds it to the stack.
The provisioned configuration is changed to reflect
the new information.
The stack member num- The stack master assigns a new The switch stack applies ber of the provisioned stack member number to the pro- the provisioned configura- switch is in conflict with an visioned switch. tion to the provisioned existing stack member. switch and adds it to the The stack member numbers and stack
the switch types match:
The provisioned configura-
1. If the new stack membertion is changed to reflect number of the provisioned switch the new information.matches the stack member number in the provisioned configuration on the stack, and
2. If the switch type of the provisioned switch matches the switch type in the provisioned configuration on the stack.The stack member numbers The switch stack applies match, but the switch types do the default configuration to not match: the provisioned switch and adds it to the stack.
1. If the stack member number of the provisioned switch The provisioned configuramatches the stack member num- tion is changed to reflect ber in the provisioned configura- the new information
2. The switch type of the provisioned switch does not match the switch type in the provisioned configuration on the stack.
The stack member num- The switch stack applies ber of the provisioned the default configuration to switch is not found in the the provisioned switch and provisioned configuration. adds it to the stack.

QUESTION 3
What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
Physical Sequential Linkage
The switches are physically connected sequentially, as shown in Figure 3. A break in any one of the cables will result in the stack bandwidth being reduced to half
of its full capacity. Subsecond timing mechanisms detect traffic problems and immediately institute failover. This mechanism restores dual path flow when the
timing mechanisms detect renewed activity on the cable. Figure 3. Cisco StackWise Technology Resilient Cabling

 300-115 pdf

 

QUESTION 4
Refer to the exhibit.

 300-115 pdf

Which set of configurations will result in all ports on both switches successfully bundling into an EtherChannel?
A. switch1
channel-group 1 mode active
switch2
channel-group 1 mode auto
B. switch1
channel-group 1 mode desirable
switch2
channel-group 1 mode passive
C. switch1
channel-group 1 mode on
switch2
channel-group 1 mode auto
D. switch1
channel-group 1 mode desirable
switch2
channel-group 1 mode auto
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
The different etherchannel modes are described in the table below:
Mode Description
active Places an interface into an active negotiating state, in which the interface starts negotiations with other interfaces by sending LACP packets.
auto Places an interface into a passive negotiating state, in which the interface re- sponds to PAgP packets it receives but does not start PAgP packet negotia
tion. This setting minimizes the transmission of PAgP packets.
desirable Places an interface into an active negotiating state, in which the interface starts negotiations with other interfaces by sending PAgP packets.
on Forces the interface into an EtherChannel without PAgP or LACP. With the on mode, a usable EtherChannel exists only when an interface group in the on
mode is connected to another interface group in the on mode.
passive Places an interface into a passive negotiating state, in which the interface re- sponds to LACP packets that it receives, but does not start LACP packet ne
gotiation. This setting minimizes the transmission of LACP packets.
Both the auto and desirable PAgP modes allow interfaces to negotiate with partner interfaces to determine if they can form an EtherChannel based on criteria such
as interface speed and, for Layer 2 EtherChannels, trunking state and VLAN numbers.
Interfaces can form an EtherChannel when they are in different PAgP modes as long as the modes are compatible. For example:
An interface in the desirable mode can form an EtherChannel with another interface that is in the desirable or auto mode.
An interface in the auto mode can form an EtherChannel with another interface in the desirable mode.
An interface in the auto mode cannot form an EtherChannel with another interface that is also in the auto mode because neither interface starts PAgP negotiation.
An interface in the on mode that is added to a port channel is forced to have the same characteristics as the already existing on mode interfaces in the channel.

 

QUESTION 5
Refer to the exhibit.

 300-115 pdf

How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1
port?
A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10.
B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10.
C. Apply the monitor session filter globally to allow only traffic from VLAN 10.
D. Change the monitor session source to VLAN 10 instead of the physical interface.
Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
To start a new flow-based SPAN (FSPAN) session or flow-based RSPAN (FRSPAN) source or destination session, or to limit (filter) SPAN source traffic to specific
VLANs, use the monitor session filter global configuration command.
Usage Guidelines
You can set a combined maximum of two local SPAN sessions and RSPAN source sessions. You can have a total of 66 SPAN and RSPAN sessions on a switch
or switch stack. You can monitor traffic on a single VLAN or on a series or range of ports or VLANs. You select a series or range of VLANs by using the [ , | -]
options.
If you specify a series of VLANs, you must enter a space before and after the comma. If you specify a range of VLANs, you must enter a space before and after
the hyphen ( -). VLAN filtering refers to analyzing network traffic on a selected set of VLANs on trunk source ports. By default, all VLANs are monitored on trunk
source ports. You can use the monitor session session_number filter vlan vlan-id command to limit SPAN traffic on trunk source ports to only the specified VLANs.
VLAN monitoring and VLAN filtering are mutually exclusive. If a VLAN is a source, VLAN filtering cannot be enabled. If VLAN filtering is configured, a VLAN cannot
become a source.
Reference:

 300-115 pdf

If you do not pass the exam, we will refund the full purchase cost to you. For the vital interests of the majority of candidates, Passitdump is absolutely trustworthy. With Passitdump CCNP Switch 300-115 exam practice questions, you can get the latest Cisco 300-115 exam questions and answers. It can make you pass the Cisco 300-115 exam. Cisco 300-115 exam certification can help you to develop your career. If you buy Passitdump CCNP Switch 300-115 dumps, you can not only pass Cisco certification 300-115 exam, but also enjoy a year of free update service.

As with other 300-115 Implementing Cisco IP Switched Networks exam is structured to stack or plug into other related courses. The combination of Cisco courses builds the complete core knowledge base you need to meet your Cisco certification requirements. If you buy Passitdump CCNP Switch 300-115 pdf, you can not only pass Cisco certification 300-115 exam, but also enjoy a year of free update service. If you fail your exam, Passitdump will full refund to you.
Exam Information:http://www.examinationsite.com/newest-cisco-200-310-dumps/
To get more information about 300-115 exam go here:https://200310site.wordpress.com/

Comments are closed.